Blast machine tunnel type
Vendor code: 10231 6 0
Sold by a blast machine, tunnel type for sheet and profile rolling
the Installation consists of a main body (cab), the input and output coils, Elevator, separator, filter units, dedusting systems, piping systems, control panel and turbine. Internal part of the machine is coated with a special wear-resistant casting nihart. the roller Speed can be adjusted by setting the desired speed of the materials at the entrance and exit of the machine. Turbine located in the upper and lower parts of machine body, because of this, parts are sanded on all sides simultaneously,and does not require a coup. Abrasive material is poured into the machine, is delivered to the Elevator by spiral and to the separator by Elevator. The rotary separator separates the abrasive from dust. Through this process, the abrasive enters the turbine without the dust. Heavy debris is retained by the cyclone. The dust entering the cyclone is cleaned through the dust filter bags. a filter is a dry system that seals out dust from the bags, which are made from felt. The dust bags are cleaned with automatic blasting. Also selling:
shot BLASTING MACHINE FOR PROCESSING of MARBLE
| MER-KUM-70 | MER-KUM-100 | |
| the Width of the Entrance of the Machine | 700 mm | 1000 mm |
| Entrance Height of the Car | 500 mm | 500mm |
| number of Turbine-Engine Power | 2 PCs – 7.5 kw | 4 piece – 7.5 kw |
| turbine Diameter number of pallets | 380 Ø – 8 PCs | 380 Ø – 8 PCs |
| Motor of Elevator | 1.5 kw | 2,2 kw |
| Spiral Engine | 1.5 kw | 1.5 kw |
| Engine Separator | 1.1 kw | 1.5 kw |
| Rotary Engine | 0.75 kw | 0.75 kw |
| Rubber Belt Engine | 2,2 kw | 2,2 kw |
| Fan Motor | 5.5 kw | 5.5 kw |
| Air Flow | 4000 m³/h | 5000 m³/h |
| Engine bellows | 5.5 KW | 5.5 KW |
| Resistance dehumidifier | 3000 Wat | 3000 Wat |
| Filter | 1 adet 36M³ | 1 adet 48M³ |
| Voltage / Frequency | 380 V 50 Hz. | 380 V 50 Hz. |
| PRICE | 41.500 $ | 75.000 $ |
- State: New
Show full
